Calibration of Timers Approval Date 14Mar14 Version 1 Review Date 13Mar15 Owner Caroline Troy 1. Introduction To ensure that the timers are working properly they must be operated alongside a calibrated timer on an annual basis. The calibrated timer must be designated for this purpose and must be calibrated against the ‘speaking clock’ or a reliable website such as www.greenwichmeantime.com annually. 2. Requirements Reference timer Telephone ...
International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-3, September 2019 Stopwatch Verification Platform: The Development of an Automated Device for Stopwatch Calibration Mohd Safirin Karis, Nohaslinda Hasim, Amar Faiz Zainal Abidin, Siti Fatimah Sulaiman Calibration processes and standards are governed by the Abstract: Stopwatch is designed to quantify the elapses time Legal Metrology Regulations. ISO 17025 provides between the start activation and deactivation. To ensure the guidelines for calibration and testing facilities. precision of the time ...
Oklahoma Department of Transportation STANDARD OPERATING PROCEDURES SOP#: 114 Date Issued: 2/2019 Dated Revised: 2/2021 Page 1 of 3 Created By: Donald McCullough Approved By: Michael Groom Timer (NIST Special Publication 960-12) Purpose: This procedure provides instructions for verifying the accuracy of general-purpose timers Equipment Required: 1. Standard timer Tolerance: Equipment shall meet the accuracy requirements of less-than-or-equal-to 2 seconds in 3 hours that is specified in paragraph 4.A.2 of NIST Special Publication 960-12. Procedure: Note: If a ...
5041 Oscilloscope / Timer Calibrator • PC controlled • Amplitude 1mV to 200V • Frequency 0.1Hz to 100MHz • Time Marker/Period 15s to 10ns • Bandwidth check up to 600MHz • Optional 2.2GHz levelled Sweep High specification oscilloscope/timer calibrator at an affordable price The 5041 is a versatile, high accuracy calibrator capable of calibrating a wide range of oscilloscopes and timer/counters to 2.2GHz. It provides a wide range of outputs for amplitude, frequency, period and bandwidth. Amplitude ...
Exam Mol 3008 – May 2009 Subject 1 (15p) ALP (alkaline phosphatase) calibrators were analyzed manually in microtiter plates to find the linearity range by following this protocol: Reaction solutions: • 50 μl of calibrator/control/sample is added to each microtiter plate well, duplicates. • 50 μl of buffer-substrate reagent is added to all wells. Start the timer when adding reagent to the first well. • Cover the wells with parafilm, and put the microtiter plate into a 37 ...
SHOT TIMER FOR MAGNETIC PARTICLE INSPECTION EQUIPMENT CALIBRATION Telephone +44 (0)1981 541122 Fax +44 (0)1981 541133 Email Sales@InsightNDT.com Web Site www.InsightNDT.com This instrument is designed to enable MPI equipment users to meet the requirements of auditors from organisations such as Boeing, who insist on accurate measurement of magnetising periods imposed on components by MPI equipment. Rapid non-contact test to measure magnetising shot. Measuring range 0.01 to 19.99 seconds. Single control. Insight NDT Equipment Ltd Simple ...
PDF | 0.08 MB | Free Download
