The words contained in this file might help you see if this file matches what you are looking for:

...Fsel procedure for calibration of linear potentiometers overview the a potentiometer is outlined in this scaling factor determined based on use jig and gauge blocks meeting requirements astm d e process uses two cycles to establish student responsibilities read understand determine upper lower limits needed set up data acquisition see section details gather provide completed record staff verify have valid access gage assistance or supervision as archive equipment tools s system disposable rubber gloves displacement transducer article personal protective safety glasses shoes hardhat detailed select verification displacements range well mode over which will be verified fully extension point instrument not recommended most bit play at beginning stroke it therefore choose less than from end near retracted care should taken avoid excess compressing plunger can cause permanent damage rev if expected lengthen during test also performed with lengthening each step compress testing five more tha...