U.P.B. Sci. Bull., Series C, Vol. 77, Iss. 3, 2015 ISSN 2286-3540 A MULTI-AGENT APPROACH FOR LEATHER PROCESSING MONITORING AND QUALITY CONTROL 1 2 Sergiu-Adrian GU , Ioan DUMITRACHE Currently there is no reliable mechanism available to allow continuous monitoring of all process conditions and leather characteristics inside the closed reactors during leather processing, so no real control. Conditions inside the reactors can only ...
RESEARCH ON RECYCLING OF WASTE LEATHER PRODUCED IN LEATHER MANUFACTURING PROCESS BASED ON SUPPLY CHAIN MANAGEMENT RESEARCH ON RECYCLING OF WASTE LEATHER PRODUCED IN LEATHER MANUFACTURING PROCESS BASED ON SUPPLY CHAIN MANAGEMENT 1* 2 1 3 Shouhui HE , Yan WANG , Xiaodong LI , Hongda LIU 1Linyi University, Linyi 276000, China 2 Linyi Branch Transportation Planning and Design Limited Company, Linyi 276000, China 3 Stated-Owned Assets and ...
2013 Rubber Skill Development Council Skill Gap Analysis across Sub-Segments (Tyre and Non-tyre) for Rubber Industry – Manufacturing process of Rubber products ICRA Management Consulting Services Limited 1 Manufacturing process of Rubber products Contents Introduction on Rubber Technology _______________________________________________ 5 1. Manufacturing Process of Rubber products ___________________________________ 9 1.1 Latex based adhesives manufacturing process _________________________________ 9 1.2 Beltings Manufacturing Process ___________________________________________ 11 1 ...
Innovating chrome tanning process with excellent exhaustion U. Sammarco International Leather Consultant - Abstract Over the last 30 years leather technology literature has been dominated by ways to reduce the environmental impact of leather production and techniques to reduce the discharge of chromium reagents have been a significant element in these endeavours. At present, no tanning agent is able to replace completely the basic chromium ...
CRIMSONpublishers http://www.crimsonpublishers.com Research Article Aspects Min Miner Sci ISSN 2578-0255 Implementation of Lean Manufacturing Tools in Footwear Industry of Bangladesh Md Abu Sayid Mia1,2*, Md Nur-E-Alam3, Farid Ahmad2 and M. Kamal Uddin2 1Institute of Leather Engineering and Technology, University of Dhaka, Bangladesh 2Institute of Appropriate Technology, Bangladesh University of Engineering and Technology, Bangladesh 3Leather Research Institute, Bangladesh Council of Scientific and Industrial ...
COURT SHOE PRODUCTION LINE: IMPROVEMENT OF PROCESS CYCLE EFFICIENCY BY USING LEAN TOOLS COURT SHOE PRODUCTION LINE: IMPROVEMENT OF PROCESS CYCLE EFFICIENCY BY USING LEAN TOOLS 1,2* 3 2 Md. Abu SAYID MIA , Md. NUR-E-ALAM , M. Kamal UDDIN 1 Institute of Leather Engineering and Technology, University of Dhaka, Dhaka-1209, Bangladesh 2 Institute of Appropriate Technology, Bangladesh University of Engineering and Technology, Dhaka-1000 3 Leather ...
9 August 2000 UNITED NATIONS INDUSTRIAL DEVELOPMENT ORGANIZATION _______________________________________________________________ US/RAS/92/120 Regional Programme for Pollution Control in the Tanning Industry in South-East Asia MASS BALANCE IN LEATHER PROCESSING Prepared by J. Buljan, G. Reich, J. Ludvik Project Manager J. Buljan Agro-Industries and Sectoral Support Branch _____________________________________________________________________________________________ This report has not been edited. The views presented are those of the author and are not necessarily shared by ...
Available online www.ejaet.com European Journal of Advances in Engineering and Technology, 2018, 5(7): 450-458 Research Article ISSN: 2394 - 658X Application of Six Sigma Concept in Shoe Manufacturing for Quality Improvements: A Case Study Abu Jor, Md. Shafaul Alam, and Md. Jakaria Alam Department of Leather Engineering Khulna University of Engineering & Technology, Khulna-9203, Bangladesh abujorlekuet10@gmail.com _____________________________________________________________________________________________ ABSTRACT The footwear sector ...
European Journal of Engineering and Technology Vol. 7 No. 6, 2019 ISSN 2056-5860 ISSN 2056-5860 STUDY ON THE APPLICATION OF STATISTICAL QUALITY CONTROL TECHNIQUES IN SHOE MANUFACTURING FOR QUALITY IMPROVEMENTS Sisay Addis School of Mechanical and Industrial Engineering, Institute of Technology Debre Markos University, Debre Markos ETHIOPIA sisayaddis123@gmail.com ABSTRACT This article presents the application of statistical quality control (SQC) techniques for solving rework/rejection of ...
Proceedings of the Second Asia Pacific International Conference on Industrial Engineering and Operations Management Surakarta, Indonesia, September 14-16, 2021 Quality Improvement of Shoes Manufacturing Process at SMEs using the Quality Function Deployment (QFD) Rosnani Ginting and Aulia Ishak Department of Industrial Engineering Universitas Sumatera Utara Medan, 20155, Indonesia rosnani@usu.ac.id, aulia.ishak@usu.ac.id Abstract The approach taken in this research is to use ...
(19) TEPZZ 6Z75ZZA_T (11) EP2 607 500 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: (51) Int Cl.: 26.06.2013 Bulletin 2013/26 C14C3/08(2006.01) C08L3/10(2006.01) (21) Application number: 11306775.5 (22) Date of filing: 23.12.2011 (84) Designated Contracting States: • Baralis Amadeo AL AT BE BG CH CY CZ DE DK EE ES FI FR GB 10143 Torino (TO) ...
PDF | 0.53 MB | Free Download
